Enamel reactor regular contact with some of the material to be corrosive, if improper operation could easily have problems, what is the Shandong Longxing Chemical Machinery Group Co., Ltd. Based on years of experience in the production of enamel reactor, a few summary comments, inappropriate Department, please advise. First, a sound system of periodic inspection and routine maintenance is necessary to establish not only enamel reactor, all production and processing machinery and equipment should have a careful and detailed timely and effective maintenance plan. Second, the most vulnerable to damage but the hardest naturally found in the lining of enamel reactor, transmission parts, sealing cases, mixers and other components need to be carefully checked, because any one component failure will immediately affect the enamel run the reactor system. Third, the enamel layer of debris cleared up in the cleaning process, should not use hard, sharp metal sticks, should choose the stick, complete bamboo stick, flexible plastic rods and other tools to better assist debris clean up. Fourth, a thorough examination of the agitator. Stirrer is leaning stir the material power mechanism, because for a long time can cause some rotating centrifugal force, so the screws and other connectivity devices blender be sure to check on whether the combination of tight, loose phenomenon should occur if timely treatment and trial run to ensure safe and reliable blender. |