With the continuous development of new technologies, stainless steel autoclave has been widely applied in the design but also to seek new breakthroughs and innovations designed to tell you about the following new ideas stainless steel kettle.
In order to avoid precipitation of solid reactants to the bottom of the case occurred stainless steel reactor, designed a new stainless steel reactor. The basic design of the stainless steel reaction vessel and the heating mode remains unchanged. The main changes to improve the stainless steel reactor bottom.
Because all of the problems are due to the precipitation of the solid reaction mass resulting from the end of a stainless steel autoclave. So the main solution is to the case even without mixing or agitation should avoid precipitation. This can be assisted by adding into a stainless steel autoclave at the end is achieved, the secondary stainless steel autoclave to be slightly higher than the actual end point, with a gap of 3 to 10 cm. This solid was precipitated in this reaction was the reaction of the secondary stainless steel tank bottom, and not the insulating layer is formed on the bottoms of the stainless steel in the actual reaction. Convection in the gap between the bottom of the autoclave through a stainless steel transfer reaction would be continuous and uniform. ª¥ auxiliary bottom stainless steel autoclave made of high strength stainless steel (SUS304), the top having a plurality of apertures, the aperture is slightly smaller than the diameter of the reaction mass, this screen will be cut to a circular shape. Its edges bent down for support when a heavy load of solid reactants, the following can be added to an auxiliary bottom metal ring as a support. This will avoid the solids concentration in the stainless steel reactor bottom, charring materials due to overheating caused by the product darken. The metal mesh can buy from the Market Complex to, for small stainless steel reactor can also design their own manufacture. Large size stainless steel autoclave manufacturer can make stainless steel reactor processing.
